Plastic Soldier Company 1/72nd British 6 pdr anti tank gun and Loyd carrier tow

I finished off my Plastic Soldier Company 6 pounder anti tank guns to go with the Loyd carriers I completed a couple of posts ago. This really is an excellent box of models. You get two carriers, two guns and a total of twelve crew and plenty of shells, boxes and shell casings. The guns are simple but detailed little kits so go together very quickly. There are enough different poses of crew that you can use some or all of them and make up your own group.

I painted the crew and the gun separately with my usual British colours and mounted them on a square of 3mm MDF. The base was covered in modelling clay and then given a coating of find sand for texture. I painted the 6 pdr shells separately too before gluing them into the hands of the crew. This was much easier than trying to paint them already glued on. Once the gun was painted and glued to the base I added the crew men and some other bits and pieces to add a bit of variety. Some dusty powders were added to the gun wheels and the base in general. To finish off the base I added some flock and tufts of grass.

I can highly recommend these kits from PSC and they are an essential part of any British unit. I took a few pictures of the guns plus added in their Loyd carriers for one more picture too. Colonel M.

 

Advertisements

Roden 1/72 German Sd Kfz 231 Eight Wheeled Armored Car

 

 

 

 

 

 

 

Another German vehicle finished this week, but this time one of their excellent eight wheeled armoured cars. This kit is from Roden, who do a good range of all the eight wheeled armoured cars and other lesser known vehicles. I bought this one from my friends at Metro Hobbies. Its a funny looking vehicle but will come in very handy for reconnaissance and scouting missions.

The kit is fun to build with most of the challenge coming in building the under carriage. The wheels and axles and suspension are done in this soft black plastic which I found quite tricky to work with. I manage to snap one axle without much effort, and found it difficult to get the wheel alignment nice and straight. Four wheels each side means there is a fair bit of aligning to do. Apart from that I lost a light to the carpet monster and struggled a little with the mirrors and other bits on the hull.

On reflection I think I should have painted this German grey and then done some highlighting to try and pick out more of the details on the vehicle. Doing a green camo stripe type thing seems to lose a lot of the detail and leaves him looking a bit boxy and flat. Anyway I have two more versions of this eight wheeler in the box so next time I will try something different.

Apologies for the fuzzy photos, blame my crappy camera phone……….

 

 

Dragon Models 1/72 StuG.III Ausf.F

I completed another Dragon StuG kit this week. It coincided with another delivery from Dragon Models in the USA. I have found them a great source for cheaper Dragon kits and if you buy three or four kits the postage from the US to Australia is only USD 12. Great value I think. They always have discounted kits and promotions on their website, so its well worth checking out. You can usually find stuff at USD 8-10 per kit which is a bargain I think for Dragon Kits. Have a look at Dragon Models USA

So onto my latest StuG kit. Its one of the new Dragon quick build models, so very easy to put together. The tracks are one piece affairs which fit around the sprocket and drive wheels. The whole kit has minimal pieces, and being a turret less tank, even fewer than normal. I still feel a little disappointed with such an easy, fast build for a Dragon kit, but the end result is still a very nicely detailed vehicle. I guess I was happy to spend more time on the painting and decorating this time. If you can find these type of kits for less than USD 10 then I think its good value. If you want a more complicated and challenging model I would be buying Trumpeter or Unimodel versions.

I kept this one a plain dunkelb yellow, but tried out some more chipping affects with a sponge. I used a black, a brown and a rust colour, and ended up overdoing the chips. I think its very easy to over do it. So I painted over some of the panels with more dunkelb and it seemed to fix the problem. Every where I read that with chipping and scratching less is always more! I think I proved a point. Lots of mud and dirt and dust with various powders and pastes was added. I then lined up my new StuG with two other friends (one a Trumpeter kit and the other another Dragon). Nice looking unit read for action.

 

 

 

The Plastic Soldier Company Loyd Carriers in 1/72 scale

Bren carriers and Loyd carriers were a crucial small tracked vehicle in World War Two and were needed in my army to tow 6 pounder guns. There are limited options in plastic for these vehicles. Luckily the Plastic Soldier Company produce a box of Loyd Carriers with accompanying 6 pounders. They also make an excellent box of three Bren Carriers in a box, which I have waiting in line somewhere. Your only other options are the excellent IBG models who make a very detailed bren carrier, one of which I have stashed away for another day too. You could look to the old Airfix 1/76 scale version but I get the feeling they will look too small and a bit dated compared to anything else.

These are excellent, simple kits, but are packed with detail. You get a bunch of stowage and crew men which you can do whatever you want with. The canvas tilts are optional, so if you want to spend more time on the crew and interior you can, and leave the tilt off. I put three crew in each vehicle and didn’t glue the tilts on, so I can take them off if I feel like it! Everything fits together beautifully, except for the front tool box which takes a bit of guesswork as to where to fix it.

I used olive drab for the hull and khaki drab for the tilt. You do not get decals with the kit so I used some from my pile, including some Airfix numbers which are really handy. A brown wash, some dry brushing, then the usual powders for dust and dirt finished them off. Due to their small size I did mount them on 3mm MDF, but you probably don’t need to as they are pretty sturdy.

The two 6 pdr guns in my photos are actually from Early War Miniatures and not the guns you get with the Loyd carriers. I am saving the PSC 6 pdrs to put in firing positions with their crew on a separate base. When they are finished I will blog them too. These EWM guns I wanted to use when they are being towed around. I decided I really wanted anti tank guns in firing positions and also towing positions. It just doesn’t look right with a vehicle towing a fully crewed gun in a firing position!

For a comparison I also finished off two resin Loyd Carriers from the Ready To Roll range of vehicles from Rapid Fire.  You can see how much smaller these are, and to be honest they don’t really match up to the accuracy and detail of the PSC kits. At four pounds a pop the resin kits are no better value.