Ploughed Fields Corrugated Card

I was destroying some card board boxes to put into the recycling the other day but then was suddenly struck with a terrain vision in my backyard. As i tore up the reinforced card board i remembered something i read somewhere about making ploughed fields out of corrugated card and thought i would give it a try. You can never have enough rural scenery, and my painted carper tiles get a bit stale.

This is about the easiest terrain build you can hope for. Clean up your corrugated card by removing the top layer of card leaving the furrowed bit. Then glue to an appropriately sized piece of MDF. You can make any size you like. The card is blended to the MDF using some no more gaps/caulk/arylic filler around the edge. I gave the edging a good cover of PVA and sprinkled with sand for texture. I also did some PVA glue and sand sprinkles on the furrows too for effect. A good dark brown spray from the can followed by a couple of lighter brown dry brushes adds some texture to the surface. The usual green flock around the edges plus some in the field for variety. I did have some warping issues with the MDF which i sorted using some heavy weights and also painting the bottom of the terrain.

Together with some hedges below the results are pretty convincing. For almost zero cost this is a great addition for my table. I just need a tractor and some hay bales now.

Advertisements

Plastic Soldier Company Sherman Firefly in 1/72 scale

The Sherman Firefly is a very poorly catered for tank model in 20mm. There very few options for the wargamer in 1/72 scale. Armourfast produce some very basic kits, Unimodel have a firefly i haven’t built, and I think Dragon models do a Firefly which i have never seen available anywhere. The Plastic Soldier Company produce the best option in this scale, and i was lucky enough to pick up a box of these crucial tanks while i was visiting PSC HQ in Henfield in October. They come in the usual PSC style in a box of three and are great value for money costing around $22 Australian per box.

Very easy to build, they come in about a dozen pieces, and can be put together in quick smart time. I like having a change from the more complicated builds. The tracks come in a top and bottom section that glue to the running gear. They have a really nice heavy sag to them on the top, an effect which is hard to get with vinyl one piece and link and length tracks. You need to drill out the end of the barrel for realism. Turret hatches can be open or closed so you can add one or two tank crew and commanders. I used my favourite AB Figures tank commander drinking a cup of tea. It was fun to even paint his army issue enamel tea mug with a blue rim. Detail is nice and chunky as usual from PSC. After building fiddly Dragon models with all their delicate bits this made a nice change for a bit of rough and tumble. I added stowage from various places in my spares box, plus some wire aerials and decals from all over the place. My decals are pretty random as i don’t suppose to adhere to any historical accuracy. I just use what looks good. A light weathering with various browns finishes him off. Its a great little model and i am excited to build the other two. I think some camo netting over the turret and barrel next time will be the plan.

Here is my Firefly taking up a defensive position on the edge of town.

Dragon Models Sd.Kfz 260 and Sd.Kfz 261 Kleiner Panzerfunkwagens

I picked up these two little armoured cars from BNA Model World, who were having a sale a few weeks back. Dragon kits tend to be a bit pricier than others, but can be great to build, so i am always on the look out for a bargain. These guys came in around $15 each including postage and i couldn’t resist.

Armoured cars are a particular favourite of mine to build and for wargaming units they are very handy. I like to use them as command vehicles, forward observers and also to ferry around heavy weapons teams. These two kits will be especially useful as command vehicles and forward observers, as they are both unarmed and so will need to keep a low profile.

Both similar kits the only real difference is the massive aerial the Sd.Kfz 261 has, plus the metal rail above the hull. My wife thought the Sd.Kfz 261 might well  double up as the laundry platoon, as the aerial looks like a hills hoist. So they easily could have dried a few uniforms. Building these two tiny vehicles involves a two part hull, plus a simple axle and suspension set up. That bit is easy. Then it gets quite fiddly as you need to attach plenty of detail, some of it very skinny and fragile, onto the outside of the hull. Some parts need filling and sanding as the same hull mould is used for all the Sd.Kfz versions and holes need to be filled when not used. I managed to break a few parts very easily so i would not recommend these kits if you want a really sturdy wargames model that is going to get thrown around. The only disappointing thing i found was the metal mesh crew hatches or turret should have been photo etched or metal rather than being solid plastic. Also the option to model the roof/turret open would have been a welcome alternative.

Overall a challenging pair of armoured cars and really enjoyable to build. Definitely on the fragile side. I managed to drop the Sd.Kfz 261 on his head just as i finished flocking the base. Luckily he had the instincts of a cat and landed on his feet, i only had to reattach him by the axles and also lost one headlight. Butter fingers. I might have uttered an expletive or two. Photos below.

imag04652

Assault on Camembert June 9th 1944

As the British moved forward from the Normandy beaches they managed to grab some small towns ahead of the main invasion force. One of these small towns is a little known hamlet called Camembert, on the road to Rochefort. A worn down British Company from the 17th Durham Light Infantry had taken the German forces by surprise and were just holding on by the skin of their teeth. Colonel Frank Mustard was occupying the town with two platoons of infantry, a couple of Cromwells and a Firefly as armour, plus a 17 pdr and a battery of 80mm mortars. In reserve he had the lumbering Churchill AVRE which was fresh from blowing up some Normandy beach defences. So not an insignificant force. Colonel Mustard had orders to hold Camembert against a possible German counterattack.

Just down the road through the bocage the counterattack was inevitably coming. A much bigger German force was on the way including one troop of Panthers, a troop of Panzer IVs, a company of Panzer Grenadiers, an 88mm and some Pak40 AT guns, plus a dangerous Tiger in support. So outnumbered and outgunned the British had their work cut out to hold on. The British plan was to try and destroy some German armour on the main roads leading to the village and block them up, then bring in mortar fire to further mess up the forces and pin them down.

It all started so well as the Firefly took out the lead Panther on the West road and blocked it up, while the 17pdr stalled the Tiger rolling down the East road. That was as good as it got for the Brits. The mortars never found their range and basically did nothing allowing the Germans to continue to advance. The remaining three Panthers got through the bocage and made very light work of the Firefly and his Cromwell friends. Then once the Tiger survived three direct hits from the 17pdr it took one big shot from close range to destroy the doomed anti tank gun. By this time the reserve Churchill AVRE has spent 5 moves moving about three inches and was already too late

Suddenly the Panthers and the Tiger were in the village. The Brits had no answers to the big cats and Colonel Mustard threw in the towel. So a decisive German victory i think. Next time the British need to be more alert and get those mortars firing early to have any chance. Plus be a bit smarter with some ambush tactics rather than just exposing themselves to the enemy so easily.